Lamellfres LNF 20 Mafell i T-MAX systainer
Tilgjengelighet: (0) på lager
Ergonomic design • With revolving depth stop
|Cutting tool Ø
||0 - 90 °
|Nominal No. of strokes – no load
|Nominal power input
||230 V / 50 Hz
- Cutting slots for biscuits
- Cutting slots for wood patches
- Compatible materials include solid wood, board and carcass materials
- The on/off switch is easily and conveniently operated with your thumb – for right-handed and left-handed users.
- With above average 750 watt (1 hp) rating – for professional continuous use.
- Double column guide for height adjustment – ensures exact, torsion-free adjustment.
- Now with extra features... and all conveniently integrated in the MAFELL-MAX. Ideal for the biscuit jointing fanatics amongst you!
- The tilt stop can be fixed with detents of 0°, 22.5°, 45°, and 67.5° up to 90°.
- Torsion-free cast angle stop and height adjustment make your work easier while 2 sturdy adjusting bolts keep your setting constant even after your 100th cut.
- All you need is "on board" in the MAFELL-MAX: practical containers for your dowels, space for the optional pitch pocket cutter, anti-slip mat and of course your LNF 20.
- 1 Disk cutter, TCT, 100 x 4 x 22 mm (3 15/16 x 3/16 x 7/8 in.), 6 teeth; Ref. No. 076905
- 1 Ejection pipe; Ref. No. 076954
- 1 Hose connector; Ref. No. 076955
- 1 Dust bag; Ref. No. 076956
- 1 Screwdriver for recessed-head screws; Ref. No. 093283
- 1 Face pin spanner; Ref. No. 093119
- 1 Mains cable 4 m (13.1 ft); Ref. No. 077015
- Transport and storage box T-MAX