Gå til innholdet
Sum:
kr 0,00
inkl. mva.

Tappfresmaskin 250 Vario

Varenummer: MAF-M991201
Tilgjengelighet: (Ta kontakt)

Tappfresmaskin 250 Vario

Varenummer: MAF-M991201
Tilgjengelighet: (Ta kontakt)
kr 244 872,00 ex. mva.
Last ned produktark
Beskrivelse
Spesifikasjoner
Relaterte produkter

Tilt range of cutting unit up to 60 ° • Laser positioning • Special cutting tool

Produsent: Mafell
Land: Tyskland
Tecnical Data

Maximum timber sizes (W x H) for right angled tenons 500 x 250 mm
Maximum timber sizes (W x H) for 60° angled tenons 220 x 250 mm
Length of support (with scale for adjusting length stop) 3000 mm
Feed rate speed 0,9 - 2,2 m/min
Place requirement 1,5 x 4 Meter
Nominal No. of strokes – no load 6670 1/min
Nominal power input 6000 W
Weight 392,1 kg
Three-phase AC motor 400 V / 50 Hz


Applications
  • Cutting tenons and laps up to 60°
  • Compatible materials include solid wood and laminated beams

Advantages

  • Considerable time-saving – due to quick and easy adjustment of length, angle and tenon dimensions.
  • Maximum timber dimensions 500 x 250 mm (19 11/16 x 9 13/16 in.) at 0° and 220 x 250 mm (8 11/16 x 9 13/16 in.) at 60°.
  • Minimum space requirement – thanks to the swiveling cutter head, the timber always remains in the same position.
  • No chip waste – fully extractable.

Description
  • The ZAF 250 Vario executes the full range of tenons quickly, accurately, efficiently and precisely.
  • For straight or angled tenons, corner or ridge half-lap joints, you can always count on the ZAF 250 Vario Tenoner.
  • To ensure exact length measurements, the stop is adjusted on a scale.
  • Developed specifically for the ZAF 250 Vario, the cutting tool can be rapidly adapted for different tenon lengths and half-lap joints.
  • The ZAF 250 Vario has precision setting options and a clearly laid-out control panel. Precise positioning of the timber is facilitated by a new built-in laser. The result is cuts which are accurate to the nearest millimeter (inch) in all types of timber!
  • After setting the desired tenon geometry, the cutter head automatically executes the required shape - including angled, haunched and chamfered cuts.
  • For hardwood applications the ZAF 250 Vario has an adjustable feed rate. Chip waste is extractable as a matter of course.

Delivery specification
  • 1 Cutter head, complete with reversible knives TCT; Ref. No. 202105
  • Support table; Ref. No. 205025

Watch the video

Forespørsel

Kjetil Hjelleset

Produktansvarlig verktøy
Hele landet
66 77 89 31
40 20 30 43
khj@falkenberg.no